There are TWO different Models of the ANTARES Office Deli the OD38 and the OD173. Each uses completely different parts, but look almost identical to each other from the front.
To Tell them apart look at the back of one of the spirals if it has a clear circle on a spiral it is an OD173, if it has a white plastic pin sticking out with 5 holes in it that the spiral can go into, it is an OD38.
To Tell them apart you can look at the back of the machine. If the back is smooth with 2 cables coming out each of which has to plug into the wall for power, you have probably an OD38. If there are angle arms to hold your cords, a cover protecting some of the cords, and an electrical plug that one of the power cords can plug into, leaving just one power cord to plug into the wall, then you have an OD173
There are also 3 different Motherboards or Control boards that might go in these machines, each board will have it's part number on the board.
This is a replacement lock and 2 Factory keys.
DO NOT BUY A KEY ON THE INTERNET, FROM US OR..
$16.00
Choice of 1 Large Yellow Triangle Size Soda Vending Machine Price Label, Self Stick Sticker for i..
$3.00
This is an Energy Drink Kit like for the Red Bull Drinks. It gets installed into one of the..
$97.00
This is the little flat black plastic thing you see sticking through the trim on the front door a..
$2.50
At least once a year or more frequently depending on useage. The dollar bill unit should be ..
$3.00
This is the Static Cling sign, Decal or Label you can put on the glass front of a Snack Vending M..
$5.00
This is the plastic piece that goes on the end of the metal spirals in a snack vending machine.?&..
$1.00
This is the plastic piece that goes on the end of the metal spirals in a snack vending machine.?
..
$1.00
This is the plastic piece that goes on the end of the spirals to help push them off the shelf.?
..
$1.00
This is the plastic piece that goes on the end of the spirals to help push them off the shelf.?
..
$1.00
This is the plastic piece that goes on the end of the spirals to help push them off the shelf.?
..
$1.00
This is the plastic piece that goes on the end of the spirals to help push them off the shelf.?
..
$1.00
This is the plastic piece that goes on the end of your snack or candy spirals and helps to tip th..
$1.00
This is the plastic piece that goes on the end of your snack or candy spirals and helps to tip the..
$1.00
This is a set of 10 of the disposable, single use cleaning cards (DLAA1129). ?At least once a year..
$25.00
This is a set of 10 of the disposable, single use cleaning cards (DLAA1129). ?At least once a yea..
$25.00
This is a full set of the 14 sponge pads required for the replacement drain or drip pan we sell D..
$21.00
Soda Vending Machine wheels.
Use caution when rolling a machine around on these wheels, as th..
$225.60
This is the 8-32 nut used on the special screws which hold the trim in place.
This nut is also used..
$1.50
These are the lowest capcity of the candy spirals.
These hold the fatest style of candy bars.
Th..
$27.95
These are the Higher capacity of the candy spirals.
These hold the Thinner style of candy bars. Th..
$27.95
This is the lowest capacity spiral having the largest openings.
This spiral will hold can g..
$27.95
This is another Low capacity spiral. It too will fit in the Entree unit or the OD16S Snack unit. The..
$27.95
This is a higher capacity Spiral letting you sell more items between visits, It will fit in the Snac..
$27.95
PROBABLY PERMANETLY OUT OF STOCK
This is the highest capacity of snack spiral, holding 8 sele..
$27.95
This is the small plastic Stud piece, Shaft, Rotator or Milky white Rod that plugs into the motor on..
$15.00
This is the little brass piece on the L-shaped plastic arm that snaps into Motor (DLAA1156) and t..
$37.50
This is the complete cooling unit with shipping crate. For the Office Deli with WHITE motors. (It..
$1,450.00
This is the complete cooling unit with shipping crate. For the Office Deli with WHITE motors. (It..
$1,250.00
This compressor must be professionally installed, and then charged with Freon. They need to..
$365.47
This is the little Blue relay down on the cooling deck. It is controlled by the motherboard and t..
$104.85
This is the condensor or cooling fan that blows cool air over the compressor and the warm coils l..
$215.00
There are THREE different control boards that might be in the snack unit of the Office Deli, ..
$675.14
These are the brand new Bottle Motors that go in the D6 or D7 position on the office deli and ven..
$73.13
This is the weatherstriping or gasket that seals the door of the soda compartment closed and keeps t..
$67.35
This is the plugin electrical cord, in the standard non-GFI version.
Unless you are using thi..
$27.00
This is the NEW STYLE plugin electrical cord, in the now Legally Mandated GFI Version.
Unless..
$83.75
This is the replacement wiring harness that goes inside the office deli snack unit, connecting the t..
$213.55
These are the flat locks found in the skinny upright Snack or Entree unit.
When ordered in pairs th..
$52.50
This would be the wiring harness that attaches to the back of each shelf and then plugs into the fr..
$30.00
This is the complete piece of formed and cut plexi glass that goes in the Office Deli Satelite snack..
$199.00
This is the fan blade that goes on the Office Deli Condensor Motor (DLAA6555) Unless the blade is d..
$25.60
These are the original stickers in the higher range. Self Stick Stickers.
They go from $1...
$25.99
As the cradle for Selections D6 & D7 rotates around there are two little nipples that stick out unde..
$67.20